Products Wall fountains

Murdock A132400S-VR Bi-level wall mounted drinking fountain, vandal resistant, with 32 inch trim panel

Aquelon Hydration · Murdock

A132400S-VR

Bi-level wall mounted drinking fountain, vandal resistant, with 32 inch trim panel

A barrier free, vandal resistant, bi-level wall mounted drinking fountain in 18 gauge, 304 stainless steel with a brushed finish. Two piece contoured bowls with integral P-traps, chrome plated brass push buttons and polished stainless steel non-squirt bubblers. Murdock rates it for indoor and outdoor use.

  • Two bowls at adult and child heights, ADA compliant when properly installed
  • 18 gauge, 304 stainless steel basins with a brushed finish
  • Polished stainless steel bubblers: vandal resistant, anti-rotation and non-squirt
  • Chrome plated brass push buttons, under 5 lbf (about 22 N) to operate
  • Integral P-traps and a 100 mesh inlet strainer
  • Auto-stop: cartridge and strainer service without shutting off the water supply
  • Vandal resistant screws, 32 inch trim panel and mounting plate with hardware

US Federal Public Law 111-380 (no lead)NSF/ANSI/CAN 61-2020Meets ADA, ADA standing person and ADA child requirements when mounted appropriately (US accessibility standard)WF3000 filter: third party certified for lead, bacteria, chlorine and microplastics, and NSF/ANSI for cyst and total PFAS reduction

Priced quote within one working day, with datasheets and certificates for your submittal pack.

Specifications

Model shownA132400S-VR: lead-free stainless steel bubbler, satin stainless finish
MountingWall mounted, bi-level, with 32 inch trim panel, mounting plate A0000000-MP2-W32 and vandal resistant screws
Basin material18 gauge, 304 stainless steel, brushed finish
BubblerPolished stainless steel, vandal resistant, anti-rotation, non-squirt
ActivationChrome plated brass push button, less than 5 lbf (about 22 N)
Water pressure range20 to 105 psig (about 1.4 to 7.2 bar)
Inlet100 mesh inlet strainer, auto-stop for service
WasteP-traps integral to the unit
Trim panel32 in [813 mm] wide, 20 in [509 mm] high
Projection from wall18 1/2 in [469 mm]
Bowl spacing16 in [407 mm] between bowl centres
Mounting heightMurdock's drawing shows 33 in [838 mm] to the lower unit for the recommended adult height. Adjust to the codes that apply on site
UseRated by Murdock for indoor and outdoor use
ToleranceDimensions plus or minus 1/4 in nominal, per Murdock
Mounting carrierCompatible with Jay R. Smith Mfg. Co. Figure 0824

Options

  • Flexible bubbler (low flow): A132200F-VR bronze, A132300F-VR gold (high polish), A132400F-VR satin stainless
  • Lead-free stainless steel bubbler: A132200S-VR bronze, A132300S-VR gold (high polish), A132400S-VR satin stainless
  • -HP high polished stainless steel
  • -RBL reverse bi-level
  • -SK4-18 stainless steel skirt kit for the upper unit
  • -WF3000 PFAS water filter, 3,000 gallon (about 11,350 litre) capacity, located remotely by the installer
  • A9100080-A remote water chiller, 8 gallons (about 30 litres) an hour, recommended within 10 ft (3 m) of the fixture